Product ID:BLACK GLOSS ALKYD VC65087
MSDS Date:03/12/1992
FSC:8010
NIIN:00-527-2050
MSDS Number: BPYHQ

PPG INDUSTRIES, INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555/(800)245-2590/441-9695

Cage: DO894

PPG INDUSTRIES, INC.

9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 2-5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

XYLENE (SARA III) (RQ 1000 LBS)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-2%

OSHA PEL 100 PPM/150 PPM STEL

ACGIH TLV: 100 PPM/150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

MINERAL SPIRITS

CAS: 64741-92-0

Fraction By Weight: 15-20%

HYDROTREATED LIGHT DISTILLATE

CAS: 64742-47-8

Fraction By Weight: 10-15%

FILM FORMERS, RESINS, AND ADDITIVIES

Fraction By Weight: 40-45%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYE:
IRRITATION. SKIN: MODERATE IRRITATION. INHALATION: HARMFUL.
IRRITATES EYES, NOSE & THROAT. REPEATED EXPOSURE TO HIGH VAPOR
CONCENTRATION MAY CAUSE IRRITATION OF RESPIRAT ORY SYSTEM &
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. CONCENTRATING & INHALING
PRODUCT MAY BE HARMFUL/FATAL.
Explanation of Carcinogenicity:HYDROTREATED LIGHT DISTILLATE LISTED BY
OTHER THAN ABOVE AS CARCINOGEN.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS &
LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO
HIGH. REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, & SWELLING ARE CONDITIONS ASSOCIATED WITH
EXCESSIVE SKIN CONTACT

First Aid:INGEST: DONT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF WATER
15 MINUTES. SKIN: FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY WASHING
W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR. APPLY ARTIF RESPIRATION
& OTHER SUPPORTIVE MEASURES AS REQ'D. OTHER: INGESTED: ANY TYPE OF
OVEREXPOSURE/SYMPTOMS DURING/FOLLOWING USE OF PRODUCT, CONTACT
POISON CONTROL CTR EMERG ROOM/DR IMMED. HAVE MSDS INFO AVAILABLE.

Flash Point Method:PMCC
Flash Point:107F,42C
Lower Limits:1.0
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CO2, DRY CHEMICAL,
UNIVERSAL AQUEOUS FILM FORMING FOAM) FOR COMBUSTIBLE LIQUID FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, USE (FOG
NOZZLES PREFERRED) TO COOL CLSD CNTNRS TO PREVENT PRESSR BLDUP,
AUTOIGNIT, EXPLOSION W/HEAT. WEAR SCBA.
Unusual Fire/Explosion Hazard:KEEP CNTNRS CLSD. KEEP FROM HEAT/IGNIT
SOURCES. CLOSED CNTNRS MAY EXPLODE W/HEAT. DONT APPLY TO HOT
SURFACES. TOXIC GASES MAY FORM W/CONTACT--HOT SURFACE/FLAME.

Spill Release Procedures:PROVIDE MAX VENT. USE PROPER RESP, SKIN & EYE
PROTECTION. REMOVE IGNITION SOURCES. TAKE UP SPILLED MATERIAL W/
SAWDUST, VERMICULITE, OR OTHER ABSORBENT MATERIAL & PLACE INTO
CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:DONT STORE ABOVE 120F. STORE LRG QTY
IN BLDGS DESIGNED/PROTECTED FOR STORAGE OF NFPA CLASS II COMBUST
LIQ. AVOID FREE FALL OF LIQ IN EXCESS OF FEW IN.
Other Precautions:IF MAT'L IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ MSDS FOR OTHER COMPONENTS BEFORE BLENDING AS RESULTING
MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS. CONTAINERS SHOULD
BE GROUNDED WHEN POURING.

Respiratory Protection:OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY
ENSURING VENTILATION CONTROLS, VAPOR EXHAUST, FRESH AIR ENTRY.
NIOSH/MSHA (TC 23C) AIR PURIFYING OR AIR SUPPLD (TC-19C) RSPRTR MAY
ALSO REDUCE EXPOSURE. READ RSPRTR INSTRUCTIONS CAREFULLY.
Ventilation:GEN DILUTION/LOCAL EXHAUST VENT TO KEEP CONC BELOW TLV & TO
REMOVE DECOMP PRODUCTS DURING WELD/FLAME CUT COATED SURFACE.
Protective Gloves:NEOPRENE, NITRILE, BUTYL, LATEX RUBBER
Eye Protection:CHEM SPLASH GOGGLES IF CONTACT POSSIBLE
Other Protective Equipment:WEAR PROTECTIVE CLOTHING INCLUDING
IMPERMEABLE APRON CONSTRUCTED OF NEOPRENE, NITRILE, BUTYL OR LATEX
RUBBER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:138 TO 242C
Vapor Pres:1.2
Vapor Density:> AIR
Spec Gravity:1.08
Evaporation Rate & Reference:11 (BU AC=100)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED
Percent Volatiles by Volume:44.90

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:WHEN HEATED, WELDING, BRAZING OR FLAME
CUTTING ON SURFACES COATED W/THIS PRODUCT MAY PRODUCE: CARBON
MONOXIDE

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,
PROVINCIAL, STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.